The Digital stream converter box is known as the best brand converter box. DirecTv universal remote can operate up to four devices like Tv, DVD, audio player, etc. If you want to operate your digital stream converter box with the DirecTV remote. Then, you are in the ideal place. Here, you can find out the digital stream remote control codes and Directv Stream Device Manual to Program Directv Remote to Digital Stream Converter Box with your favourite universal remote. you need to follow up to program directv stream remote to connect.
There are many digital stream converter box remote codes that are ready. All you need to do is search for your remote code and learn the process to connect your DirecTv remote to a digital stream converter box. Read out the article to get some valuable information about the program.
Listing of Digital Stream Converter Box DirecTV Remote
The following table is all about digital stream converter box DirecTv remote codes. Pick out any one code which suits your device model from the below code list. All the program codes are valid on our pages as we tested them before adding them to our code list. Follow the complete procedure to program correctly.
Digital Stream TV Converter Box Remote Codes
3-Digit Digital Stream TV Converter Box Remote Codes
4-Digit Digital Stream TV Converter Box Remote Codes
5-Digit Digital Stream TV Converter Box Remote Codes
How to Program Directv Remote to Digital Stream Converter Box
To program DirecTV remote to a digital stream converter box. We have discussed a few steps that are given below. you need to follow each step effectively to connect your converter box with the DirecTV remote. Use a numeric pad on the DirecTV remote to enter the corresponding code.
STEP:1 First, switch on your device that is a digital stream converter box
STEP:2 Switch to AV2 from the DirecTV remote control located at the top
STEP:3 Press the hold on both mute and select buttons on the DirecTv remote and wait till a light indicates that it will blink two times.
STEP:4 Select a code from the following code list
STEP:5 Press the channel up button on the remote control and wait for 2 seconds, again press the channel button.
STEP:6 Then, the digital stream converter box should turn off which means your remote finds its correct code and you can handle your digital converter box with DirecTv remote.
STEP:7 If in case, your AV2 button was blinking three times and if the digital stream converter box remains on then, your remote is unable to find the correct code.
STEP:8 If this happens, you need to repeat the above second step and try to find the right program code.
STEP:9 Once you find out the right one then, you need to tap on the select button to save the corresponding code.
Directv Stream Remote Programming
There are 2 ways to program the Digital Stream Converter Box Universal Remote, namely the manual and automatic methods. There are both methods mentioned step by step in a simple quick format. Read further to know these steps and program your Digital Stream Converter Box Remote into a universal remote.
How to program Digital Stream Converter Box Universal Remote using Manual Method?
1. Switch on your electronics device like Smart TV, DVD, etc.
2. Now, select the Digital Stream Converter Box Universal Remote Code from the given Digital Stream Converter Box Universal Remote Code list.
3. To verify, take your remote control, press and hold the Code Search Button for 3 seconds. Now, the remote’s LED light will blink and release the remote button,
4. After that, Press the device selection button such as TV on Digital Stream Converter Box Remote Control.
5. Enter your Digital Stream Converter Box Universal Remote device codes. After that, the LED light of your remote will turn off. A tiny LED light will start blinking 4 times.
6. As soon as it blinks, choose any code from the above list and enter it into your device. The light will switch off once you enter the correct code. If it shows an error, then, try another code.
7. Now, your Digital Stream Converter Box Universal Remote is connected with your devices. You can test the code by pointing it towards your device and press on the on/off button.
Note: If the device does not respond to the device, then simply try another code from the list and follow the steps again.
How to program Digital Stream Converter Box Universal Remote using Auto-Search Method?
1. Power on your smart device like Television that you want to program with Digital Stream Converter Box Universal Remote control.
2. Find the Code Search Button on your device and press to hold for 3 seconds until the LED light is on.
3. Now, point the remote towards the TV and click CH+” &“CH-“switches. The remote will show you on/off signals. Now, press the “up” or“down” key continuously and the device will turn off.
4. As soon as the device turns off, try to power on the tv to verify your entered code. If the code works, the device will turn on. Now, try changing the channel with your Digital Stream Converter Box Universal Remote and check if the remote is programmed correctly.
5. Finally, press the “device” button and save the code. The device LED will blink twice for confirming the code stored.
After reading this “directv stream remote programming” post, if you have any doubt feel free to comment below and if you have any questions, you can ask in the comment box as we are here to support you. In our articles, we write everything about How to Program Directv Stream Remote . So, if you want different brands of universal remote codes or programming methods let us know.