What Are the Element TV Codes for Directv Remote & Program Guide

Televisions using element technology can be programmed using the universal remote control. Its programming procedure and codes are simple and easy to comprehend, making it ideal for configuring your television’s remote control.

The Element TV Codes for the Universal Remote code list must be used to configure the remote control. If you don’t have a user manual, don’t worry; we’ll supply you with a full list of programming methods as well as a code list; all you have to do now is choose the appropriate code from the list to pair your device with the remote control.

Element TV setup Code for Directv Remote

If you recently bought a universal remote and need the Element TV remote control codes, this website has them listed below. The Element TV remote control codes are shown below. For each device, we transmitted numerous codes. As a result, if one of the codes does not work, try a different one.

Codes for the Element TV’s universal remote control with 5 digits-

1355910885
11756 12049
1243412964
1070611886
1236011687
12183

For “Element TV Universal Remote Codes” for “Element TV Universal Remote Codes,” here’s how to do it.

Activate the device you desire to programme by first turning it “ON”.

Step 2: Press and hold down the “TV” button on your remote control for a few seconds. After that, press and hold both the “SETUP” and “SELECT” buttons at the same time.

Step 3: The “GREEN” or “RED” light will blink twice while you press the buttons to indicate whether you have selected the correct option. The fourth step is to begin.

Make sure the light is still on when you release the “SETUP” button.

Keeping the remote control in front of the gadget you’re managing is the fifth step in the process.

Using the codes provided below, enter them into the appropriate spaces in Step 6. From the table, you can select any code you like.

The “element tv remote” doesn’t seem to be working, so please try different-different digits codes for it.

The seventh step requires you to hold down the “CHANNEL +” and the “TV” buttons at the same time. In some way, your “channel +” will be programmed. So because you do this with every single programming component that you intend to use.

Keep holding down the “TV” button for a few seconds to save your codes in Step 8. Both the “GREEN” and the “RED” lights alternately flash twice.

How to Program Element TV Universal Remote?- Auto-Search Method

The auto-search method to program Element TV universal remote is used when manually you are not able to find the correct remote code. In this method, all the Element codes are scanned one by one. Follow the given steps to program Element universal remote control with the auto search method.

Step-1. The first step is to turn on the device to program with Element universal remote control.

Step-2. Press the component button on the Element universal remote and hold it for three seconds. An indicator light will flash, showing that the Element remote is now in learning mode.

Step-3. After the LED flashes press the “Ch+” and “Ch-” buttons on the Element TV universal remote. Keep pressing these buttons of the Element remote till your device turns off.

Step-4. If your device responds, this means that Element universal remote is now successfully programmed with your device.

Step-5. Finally, save the chosen Element universal remote code, press the device button, and the indicator light will flash to confirm.

What are the Steps to Reset DirecTv Remote?

If your DirecTv or Element TV remote is not working due to any reason, you have an option to reset it. To resolve the glitches shown by Element TV universal remote, we have a solution for you. Some issues can be drainage of batteries, remote falling, batteries getting detached and many other such scenarios. If you have any of the issues, you can quickly reset your DirecTv remote by following a few steps.

Step-1.  Press and hold the “Select” and “Mute” button of the Element TV universal remote together for a few seconds. The LED on the DirecTv remote will flash two times.

Step-2. Once the green LED blinks on the DirecTv remote, enter the code 981 using the numeric keypad on the universal remote.

Step-3 . The LED light on the Element TV remote will blink 4 times to confirm the code. The DirecTv universal remote is now successfully reset to factory settings.

Note: You can apply the same method if the DirecTv remote work with IR(Infrared) or RF(Radiofrequency) connectivity devices. Here, only the connectivity type is different rest is the same.

FAQs

1. How to fix my Element TV universal remote if it’s not working?

Ans.  There are many ways to fix the Element TV remote if it is not working. The first one is to run a power cycle. To do this, turn off your TV and the Element TV reviewer. Once done, unplug all the units of your device. Re-plug the units after 5 minutes and you are done.

2. What to do if the Volume of Element TV is not working?

Ans. If the volume is not working, firstly reset the Element TV universal remote by removing the batteries and eliminating your receiver. Before restarting the receiver, wait for ten seconds. After that, restart your receiver and let the display appear. Once you see the display, but the batteries of Element TV universal remote again and then check if the volume is working.

3.  My Element TV Universal Remote is not responding. How to fix it?

Ans.  In case the Element TV remote is not responding, press and hold the domestic button on the remote for 10 seconds. This will make your Element remote rejoin itself.

4. If Element TV Universal Remote won’t change channels, what to do?

Ans. Firstly test if you have all the channels available on your Element TV device. Now, click on the Menu button of the Element TV universal remote and scroll until you find the main menu guide. Go to Setup and choose No auto-tune.

Summing Up

In the above write-up, we have given all the details about Element TV universal remote and various methods to program it. Now you must be clear with the Element TV codes for DirecTv Remote. If you have any queries or suggestions, reach out to us