What All You Will Get :-đź“ş
Here we discussed all the programming method which you help you out with problem regarding Element TV universal remote codes. As well as we also mention all the codes that prove helpful to program remote to element tv.
Element TV Universal Remote Codes List
If you want to program Universal remote control with Element TV, you will need a set of remote codes. To help you with this, we have mentioned the complete list of Element TV universal remote codes required to connect your Element TV with the universal remote.
YOU MAY ALSO LIKE :
RCA Universal Remote Codes List & Program Instructions
Universal Remote Code List & Guide
What are the Element TV 3 Digit Remote Codes?
Element TV universal remote codes can be found in three, four or five digits. You need to select the desired code as per your device’s model and brand name. After the list of four and five-digit codes for Element TV, here is the complete list of Element TV 3 digit remote codes.
| 247 | 096 | 005 | 043 | 048 |
|---|---|---|---|---|
| 238 | 004 | 028 | 155 | 127 |
| 076 | 153 | 151 | 154 | 231 |
| 252 | 051 | 046 | 168 | 121 |
How to Get Element TV 5 Digit Remote Codes?
In the above section, we have given the list of three-digit codes for Element TV universal remote. In this section, you will find Element TV 5 digit remote codes. Choose the required five-digit
| 11687 | 11886 | 12183 | 10178 |
Where to Find RCA Universal Remote Codes for Element TV
In this section, you can find the list of RCA universal remote control codes for Element TV. We have covered you with all the necessary codes to program Element TV with the RCA universal remote control.
| 13559 | 3559 | 12964 | 1886 |
|---|---|---|---|
| 1687 | 13907 | 12256 | 2183 |
| 2964 | 12183 | 11886 | 11687 |
What are the Comcast Remote Code for Element TV?
If you want to program Comcast remote with Element TV universal remote, you need some universal remote codes. For your reference, we have provided the complete list from where you can choose the required Comcast remote code for Element TV and do the programming.
| 13559 | 12183 | 12964 | 13907 | 12183 |
|---|---|---|---|---|
| 13559 | 11687 | 11886 | 12260 | 10178 |
| 11687 | 13907 | 12964 | 11864 | 11886 |
What are the GE Universal Remote Codes for Element TV
Check the complete list of GE universal remote codes for Element TV. You have to choose the required GE universal remote code and follow the programming manual to connect the Element TV with the GE remote.
| 10911 | 5841 | 1025 | 1173 | 5341 |
|---|---|---|---|---|
| 5421 | 6021 | 5471 | 5361 | 1651 |
| 5831 | 5411 | 240 | 4111 | -- |
List of Element TV Codes for Philips Universal Remote
Following is the list of all the codes for Philips universal remote. Using these codes, you can program Element TV to Philips universal remote. So, select one code from the list of Element TV codes for Philips universal remote and follow the setup manual.
| 4111 | 11068 | 5341 | 6021 | 1091 |
|---|---|---|---|---|
| 14175 | 5841 | 11568 | 1651 | 14023 |
| 5471 | 3477 | 11147 | 5831 | 5421 |
| 14156 | 1918 | 5361 | 13656 | 10862 |
How to Program Element TV Remote Through “Auto Code Search Method”:
In this method, all the related codes of your device are scanned by the remote control. All the Element TV universal remote codes are scanned one by one. When remote control finds the best and suitable codes which prove helpful for you at the time of programming.
Step1: Please check the batteries of your remote control and start your device which you want to program with your universal remote control.
Step2: Choose the “DEVICE” button from your remote control by clicking on the “DEVICE” button. press and hold the button until the remote LED light blinks “twice”. It’s message from your remote control (now your remote control is ready to program).
Step3: Press these (“CH+”, “CH-“, “VOL+”, “VOL-“) button continuously. Until your device is not turned “OFF”.
Step4: After this you can “ON” your device and check the remote control is working or not.
Step5: You can check your remote control by pressing the “CH+” or “VOL-“ buttons. If your remote control is able to change the channel or increase the volume. Then your remote control is well programmed to control your device.
Now you have to tap on the “DEVICE” button again to save the Element TV universal remote codes and store them for next time. If this method is not proved helpful to you then you can try other methods which are given below.
How to Program Element Remote through “CODE SEARCH METHOD”:
In this method we have to enter the element tv remote manual code which we give you in between the programming instruction. Through this code your remote control is convert into the search mode.
Step1: Firstly, you have to “ON” your device.
Step2: After this, you have to tap on the “SETUP” button.
Step3: Now, you have to enter the manual code and the code is “9-9-1”.
Step4: After this, press and hold the “POWER” button as well as “CH+” button simulataneously. After few seconds your device turned “OFF”.
After few seconds “ON” your device and check your remote control is compatible with your device or not.
How to Program Element TV Universal Remote Control Through “Manual Method”:
In this method we have to find the make and “MODEL NO.” through which we can easily program remote control.
Step1: Please check the batteries of your remote control and start your device which you want to program with your universal remote control.
Step2: Tap on the “TV” button from your new universal remote control.
Step3: After this, press and hold the “SETUP” button from your remote control. After few seconds you can see LED light blinks “twice”. Now your remoete control is ready to program.
Step4: Now it’s time to enter the “KEYCODE” which you get from the instruction booklet.
After this you have to press and hold the “POWER” button to save the codes. Release the button when your device is turned “OFF”.
Read More : How to Get Lg Blu Ray Universal Remote Codes
Now you have to press the “POWER” button again to “ON” your device. Check your remote control is able to control device. You can check it by pressing the “CH+” button or “VOL+” button. If your remote control is able to change the channel of your device as well as volume. Then it’s confirm your remote control is compatible with your device.
If still your remote control is not working according to your device. Then change the code and try again with programming instruction.
Read More: 4 Digit Universal Remote Codes & Programming Instructions
What are the Steps to Program DirecTv Remote to Element Smart TV?
1. Press the component button “TV” on the DirecTv remote. An LED light will blink on the DirecTv remote, indicating the learning mode.
2. Enter the code selected from the list of DirecTv remote codes for Element TV.
3. Press the “Vol+” button to check if the code is working.
4. Save the programming of the DirecTv universal remote with Element TV by pressing the “Power” button.
How to Program Philips Universal Remote Control to Element Tv?
1. Switch on the Element TV to connect it with the Philips universal remote control.
2. On the Philips remote, press the component button as per the device (TV, CBL, DVD, etc.)
3. Now, enter the chosen code from the list of Philips remote codes for Element TV.
4. Check if the entered code is working and save the setup by pressing the “Power” button on the Philips universal remote
How to Reset Element TV without Remote Control?
If you want to reset the Element TV without using the remote control, follow the steps given below.
1. Firstly, try to press the power button for five seconds. The Element TV will restart automatically.
2. If the lock persists, unplug the Element TV from the main socket and wait for a few minutes.
3. Plug in the cord back to the socket, turn on the Element TV, and resume watching the content.