Olevia TV Universal Remote Codes & Setup Methods

If you are using Olevia TV and looking for an Olevia TV Universal Remote Codes this is the perfect blog that will provide you with universal remote control codes like 3 digit code, 4 digit code or 5 digit code in this post we will provide a guide for remote programming Olevia TV with work code.

If you’re also looking forward to this opportunity, take advantage of this blog and your Olevia TV programming with universal remotes such as DirectV, Comcast, Cox and Ge universal remotes. Then check the following codes late and enjoy your favorite remote.

Olevia TV Universal Remote Codes : 3 Digit

Find the complete list of Olevia TV 3 digit universal remote codes in the section given below. These three-digit codes can be used to program Olevia TV with universal remote control.

Code
506
127
432

Olevia TV Universal Remote Codes : 4 Digit

In the above section, we have mentioned the three-digit codes. Here is the list of 4 digit Olevia universal remote codes to program Olevia TV with the universal remote. Choose the required code as per requirement and follow the instructions given above to connect Olevia TV with universal remote control.

code
1610
1144
1240
1610
1178
1331

Olevia TV Universal Remote Codes : 5 Digit

Olevia universal remote codes are three, four, and five-digit codes. Following is the complete list of 5 digit Olevia TV remote codes that you can use to program Olevia TV with universal remote by following a simple method.

code
11858
11144
11240
11858
11610
12272
11331

Olevia TV Universal Remote Codes Comcast

Code
12272
11144
11240
11610
11331

List of RCA Universal Remote Codes For Olevia TV

Code
11331
1207
11610
1610
1240
11240
1144
11144
1222
077
1331

How to Program Olevia TV Universal Remote without Codes?

If you want to know how to program Olevia TV without codes, we have a solution for you. Follow the given steps and learn how to program Olevia devices to universal remote without codes through this automated method.

1. Firstly, turn on the Olevia TV or the device to program with the universal remote.

2. Then, press the component button on the universal remote as per your device for three seconds. The LED indicator will blink, showing that the Olevia TV Universal remote is now ready to get programmed.

3. Hold the remote in front of the Olevia TV and press the “Ch+” and “Ch-” buttons. The Olevia universal remote will give on/off signals; keep pressing the buttons unless the device turns off.

4. Now, to verify the Olevia TV universal remote code, press the “Power” button on the remote control. If it turns on, try changing the channels. If the universal remote works correctly, this means that Olevia TV universal remote is successfully programmed.

5. Finally, to save the code, press the “Device” button, and the LED will blink to confirm the successful programming of Olevia TV with the universal remote.

How do I program the Olevia Universal TV Remote?

The code search method differs depending on your remote control. The following are examples of what can be used with the most popular remote controls.

Turn on your TV and press and hold the TV button. Then click “Enter Code” appropriate for your brand

Your TV will turn off if you enter the correct code. This means your setup is complete.

Note: If your TV doesn’t turn off, repeat the process with another code. Or you can try an alternative method.

How to program Olevia TV universal remote control with auto search

With automatic search method, all universal remote control codes are scanned on the remote control. The codes are scanned one by one to find the correct remote code that works with the remote to program the controller. Follow the instructions below:

“Turn on” the smart device as the “television” you want to use with the universal remote control.

1.Turn on the remote control and touch the device button (TV, DVD, CBL and OK / SEL) for 3 seconds.

2.The LED display indicates that the device is ready for programming.

3.Point the remote control at the device and click “CH +” and “CH-” buttons.

4.The remote control displays an on / off signal. 5.Press the up or down button repeatedly until the device turns off.

6.Check the code by clicking the On / Off button. The device must be turned on. When starting up, try changing the channel to make sure the remote has been programmed correctly.

7.Now tap on the “Device” button to save the code. The device LED flashes twice to confirm the stored code.

How to program the Olevia Universal TV Remote using the manual method

With the help of the keycode, we can easily program a universal remote control and the keycode identifies your equipment make and model.

1.You must first “turn on the device”

2.Press “TV” on “Olevia Universal TV Remote Control”

3.Now press and hold the “Settings” button on the universal remote control until “Flash” is displayed (ie in “Training mode”).

 4.Finally, enter the “lock code” that you have collected in the programming manual (operating instructions).

5.After doing this, “point the remote at the TV” and then press the “Power Hold” button.

You can release the power button when the screen is off

That’s all, your TV now works fine with a universal remote control. If your device doesn’t work, repeat the same process with other codes from the same section of the reference table.

How to program the Olevia Universal TV Remote with code search

If you cannot find a suitable lock code for your device at this time, you can set the universal remote control to the correct one in search mode. This is a manual mode code that forces the remote control to search mode

Step – 1. First “activate device”

Step – 2.Now hold down the “Setup” button

Step – 3.Enter the code “9-9-1” (three digits)

Step – 4.Now hold “power button” on the remote control and push the channel upwards until the device turns off the TV.

Read More : How to Get Element Universal Remote Codes

The method above may take some time, but finding your lock code is very important. After the above process, your remote control will work for all functions.

How to Program GE Universal Remote to Olivia TV?

Once you have chosen the remote code to connect Olevia TV with GE universal remote, here are the steps to program Olevia TV with the remote.

Step – 1. The first step is to switch on the Olevia TV.

Step – 2. Once the TV is turned on, press and hold the Setup button on the GE universal remote, and a red indicator light will turn on.

Step – 3. As the light turns on, release the Setup button on GE universal remote.

Step – 4. Now, choose the GE universal remote code for Olevia TV and enter it manually.

Step – 5. Once you enter the GE remote code, the red indicator light on GE universal will turn off.

Step – 6. Finally, press the “Power” button on the GE universal remote. If Olevia TV turns off, this means that you have entered the correct code.

Note: Now, the programming of Olevia TV with GE universal remote is successful. If the Olevia TV does not respond after entering the code, you can select another GE remote code from the list and repeat these steps.

Conclusion

In the above write-up, we have explained different methods to program Olevia TV with universal remote control. Also, we have mentioned how to program Olevia TV with GE universal remote. Apart from the programming methods, we have mentioned different sets of Olevia TV universal remote codes. If you still have any queries, please write to us.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *