4 Digit GE Universal Remote Codes & Program GE Remote

Are you searching Ge universal remote instructions or 4 Digit GE Universal Remote Codes ? Here you’ll get all the things for GE Universal Remote Control and GE remote codes.

If you scroll down the then you get some table of GE universal remote code list in that table you get “GE Universal Remote Codes” that are suitable for your device. Choose the codes according to your remote control model number and also version.

YOU MAY ALSO LIKE :

Best GE Universal Remote Codes for Vizio TV & Program Methods

How Do I Program GE Universal Remote to a TV Without Code?

NOTE: Please open the back cover where the battery is fixed. This is just to know about the model number to identify the version of the remote control.

You have to fix a new set of batteries into the battery set. After that, you have to find the suitable

4 Digit GE Universal Remote Codes

GE universal remotes tv codes for your device and according to your remote control model number.

GE Universal Remote Code List Vizio

Are you looking for general electric universal remote codes for Vizio TV,  you will find them here. We have mentioned the table of GE universal remote codes for Vizio TV.

There are multiple codes as per different models and brands. From the list of GE universal remote codes for Vizio TV, pick the required code and connect your Vizio TV with the GE remote easily.

What are GE Universal Remote Codes Samsung TV?

If you are looking for GE remote codes for Samsung TV, you are at the right place. The below section contains the detailed list of GE universal remote codes Samsung.

You can go through the list and find the required code for Samsung TV. If one code does not work, try another from GE universal remote code list.

List of GE Universal Remote Codes for Philips TV

We have given the list of GE TV remote codes for Philips TV. Using these codes, you can program Philips TV with GE universal remote codes.

General electric universal remote codes are those codes using which you can easily program the GE universal remote with any device such as TV, DVD, etc. If you have a Philips TV, you will need this list of GE Universal Remote Code Philips TV.

Polaroid TV Codes for GE Universal Remote

GE Universal Remote Codes for Jvc Television

GE Universal Remote Codes for Insignia Television

GE Universal Remote Codes Emerson

GE Universal Remote Control Codes for Sylvania TV

GE Universal Remote Control Codes for Lg Television

GE Universal Remote Codes for Philips Television

GE Universal Remote Codes for Rca Television

GE Universal Remote Codes for Element TV

GE Universal Remote Codes for Sharp Television

How to Program a GE Universal Remote to a TV Without Code List

Step 1. Make sure the GE universal remote is turned on before you start the process with the device you want to connect.

Step 2. On the GE universal remote control, press the “Setup” button . Press the component button according to your device (TV, DVD, CBL, etc.) on the GE remote. An LED will blink and remain lit now.

Step 3. Now, press the power button and keep pushing it unless the device responds to GE universal remote control. Here, the remote will scan the entire code one by one and respond to the correct code.

Step 4. When a device shuts down, this means that now GE universal remote is programmed. When you find the correct GE universal remote, LED will turn off.

Step 5. Finally, to save the found code, press the “Enter” button. This will save the GE universal remote code in the remote.

How Can I Program GE 4 Device Universal Remote without Codes?

You can also program GE 4 device universal remote control without using codes. This is an automated method where the GE remote scans all the codes automatically. If you own a GE 4 device remote and do not want to program it manually, here is the quick method for you.

Step 1. The first step is to turn on the device you want to connect with GE 4 device universal remote control.

Step 2. After switching on the device and GE 4 device universal remote, click on the “Code Search” button given on the remote. An indicator light will turn on, showing that the GE universal remote is ready to be programmed.

Step 3. Now, press the component button per the device you want to program with the GE 4 device universal remote.

Step 4. Press the “Power” button on GE 4 device remote multiple times. Wait at least for two seconds after each press so that the remote recognizes the code.

Step 5. When the correct code is found, the device will respond and will turn off. Also, the flashing LED will turn off on the GE 4 Device universal remote. It indicates successful programming.

Step 6. Finally, press the “Enter” button on the GE 4 device remote to save the chosen code.

Complete List of 4 Digit GE Universal Remote Control Codes

In this section, you will find the list of 4 digit GE TV remote codes. You can pick the required code from the list and follow the programming instructions mentioned in the later sections. GE universal remote codes are usually three, four, and five-digit codes. This section contains only the 4 digit GE universal remote codes list.

Things to Do Before Programming GE Universal Remote Control:

• Firstly, switch “OFF” all the other devices which you don’t want to program. After that, you have to go for the “SETUP” button and press it as well as hold it also. Until the indicator light(red)  blinks.

• After that, you have to choose your “DEVICE” button. For example, you want to program your DVD. Then you have to press on the “DVD” from your GE universal remote control.

• Now may go for the start to enter the device GE remote codes from the starting one by one. Remember that when you enter all the GE tv remote code then indicating light(RED) blinks from your GE Universal Remote Control.

• Now you have to go to the “POWER” button from your remote control and press it. If you entered the correct GE universal remote code then your device will turn “OFF”. If you don’t enter the correct codes. Then your device will not shut “OFF”.

How to Program GE Universal Remote Control:

Here I suggested three methods to program your new “GE Universal Remote control”. Here we also mention the table in which you get a suitable device code for your device. Now let’s talk about programming instruction all the “Programming GE Universal Remote Control” is explained below.

Programming GE Universal Remote Control Through “Code Search Method”:

 In this method, we use a code that can convert the remote control into the search mode. For this, you have to follow the programming instruction which I explained below.  

Step1: Make sure that all other devices are switched “OFF”. Only that device has to “ON” which you want to program.

Step2: Now you have to find the “SETUP” button on your remote control. If you get it then press it.

Step3: Now it’s time to enter the code which converts your remote control into the search mode and the code is “9-9-1”. All the GE universal remote television codes are available in the GE universal remote codes list table above

Step4: Now you have to go again for the “POWER” button and “CH+” button from your remote control. Press these buttons from your remote control. After this, your remote control has to shut down.  

If your device is shut down perfectly then your remote control is programmed successfully. This method is very helpful. If this is not proved helpful for you then you have to move on to our other “GE universal remote programming” methods which we suggested below.

Programming GE Universal Remote Control Through “Manual Configuration”:

In this method, you have to keep your old and new remote control in front of each other. After that both remote control gets manually configured. So, let’s start from the beginning.

Step1: Keep both the remote control in front of each other.

Step2: Now you have to tap on the “SETUP” button from your GE universal remote control.

Step3: Now it’s time to enter the GE universal remote control codes. Which you get from the “Instruction Booklet”.

Step4: Now you have to choose any favorite “FUNCTION” key from your new remote control. For example, the “CH+” button.

Step5: Now again you have to press the “CORRESPONDING” key from your “old remote control”. If indicating light is blink once then it’s signal from the remote control that your GE universal remote control codes is saved correctly.

Now your favorite “FUNCTION” button is saved successfully. Now you can use this button. You can program all other buttons of your universal remote control to control your device.