How Do You Find Universal Remote Codes for Zenith TV

Hello Users, programming a Zenith Universal Remote Control just takes a few steps but often the users find it difficult so here we have come up with the best methods for you to program your universal remote control and universal remote codes for Zenith TV in quick and easy steps. Just follow any of the methods mentioned below and you are all ready to use your zenith remote control.

  • Programming Zenith Universal Remote without Codes:

In this method the codes in the remote are put through a search by searching one code at a time until it finds the one that works with your remote.

STEPS TO FOLLOW:

  1. Turn on the device you want to program to use with the remote(ex: If you want to setup the remote for TV then switch on the TV manually)
  2. Switch On the remote and from the various device buttons on the remote (TV, DVD, CBL and OK/SEL) press and hold the one which matches with your device for around 3 seconds until the LED lights up indicating that the remote is ready to program.
  3. Point the remote towards the device and press “CH+” and “CH-“buttons until the device turns off.
  4. To check the universal remote codes for Zenith TV, press the power button. Once the device is turned on, change channels to confirm that the remote is programmed perfectly.
  5. To save the code, press the device button. LED will light twice confirming the code stored.
  • Programming Zenith Universal Remote Manually:

This method is useful when you have located the code of the device. The code automatically recognizes the device and thus easily program the remote.

STEPS TO FOLLOW:

  1. Turn on the device you want to program to use with the remote(ex: If you want to setup the remote for TV then switch on the TV manually)
  2. Switch On the remote and from the various device buttons on the remote (TV, DVD, CBL and OK/SEL) press and hold the one which matches with your device for around 3 seconds until the LED lights up indicating that the remote is ready to program.
  3. Enter the universal remote codes for Zenith TV for the device (you will find it in the instruction manual of the remote) using the number buttons.
  4. Now press and hold the power button on the remote, while pointing it towards the device until the device turns off.

This is the simplest way to program your remote. In case the device is not operating then try some different code from the manual and repeat the above mentioned steps.

  • Programming Zenith Universal Remote with Code Search:

In case you do not have the code for the device, you can then go for this method to program your remote by putting it on search mode by the use of manual codes. The remote will then be searching for a code until it finds the correct one for your device.
Read More: How to Program Brighthouse Remote Using Universal Remote Codes?

STEPS TO FOLLOW:

  1. Turn on the device you want to program to use with the remote (ex: If you want to setup the remote for TV then switch on the TV manually)
  2. Press and hold the Setup button on the remote while entering three digit 9-9-1 code.
  3. Next press and hold the power button and the channel up button till the device turns off.
  4. The turn off indicates that the device is programmed.

This method may be time-consuming compare to the other methods but once you are done with the above-mentioned steps the universal remote will work properly.

Zenith Remote Control Codes

BrandCode
GE

719, 318, 601,803,502,018, 107, 310, 002, 007,
Magnavox

008, 402,002 , 508, 510,109, 118 , 209,408, 502, 309,
Panasonic

807,901, 017 , 618, 516,
RCA

514, ,402, 406,511 ,211, 302, 411, 502 ,320, 002, 102
Philips

508, 310,009,502,,202, 209,109 , 402, 408, 002, , 221
Mitsubishi

510,206, 803, 619,114 ,502, 002, 102, 509, 709
Craig

906,805
Sharp

812, 111, 013,502, 918,813, 712, 002
Sony

801,202
Samsung

212, 702, 502, 818, 103, 112, 908,512,002, 102
Emerson

002, 003,014, 104, 005, 004, 105 ,006,
Daewoo

002, 102,221, 303, 311, 314 ,110, 203,214,
Fisher

902 619,506, 606
Sylvania

402, 408,009, , 309, 717,117, 209,109,502, 508 002,
Zenith

407, 512,008, 117, 601, 311, 405 ,713, 916,701
Toshiba

506, 512, 112, 313,902 510, 413,
Sanyo

312,619 , 902 412, 506, 002
Memorex

102, 502, 701 506, 601
Goldstar

102,307, 502,818, 916, 117, 207, 713 217, 002
Funai

805, 906,206,
JVC

510,702, 902,208, 308, 417, 502,007, 108, 617, 606,
Proscan

719,601
Fujitsu

206
Hitachi

116, 218, 502, 507,310, 002, 016,315, 415,516, 619
Symphonic

906 904, 117, 520
Sansui

215

GE Universal Remote Codes for Zenith TV

Code
0058
0058
0247
0138
0001
0134
0266
0064
0050
0358
0310
0153
0227
0121
0245
0338
0111
0078
0059
0023
0131
0226
0009
0004
0038
0252
0135
0288
0039
0091

Rca Remote Codes for Zenith TV

code
1449
1083
1152
1217
1427
1428
1424
1464
1210
1196
1153
1004
1000
1051
1463
1001
1154
1151

Zenith TV Codes for One for All

code
0059
0038
0009
0004
0091
0050
0153
0134
0138
0131
0078
0064
0121
0111

Zenith TV Codes for Philips

code
0505
0002
0632
0437
0712
0015
0224
0415
0008
0606
0324
0115
0713
0228
0903
0430
0326
0126
0916
0435
0714
0407
0405
0502
0409
0826
0710
0701
0507

Related Articles