Is your Samsung TV’s original remote control damaged? And do you have your Samsung television’s new GE remote control? To program and subsequently use your Samsung television, you’ll need a fully functional GE universal remote code. I’m here to help.

In this post, I’m going to reveal all of the codes for the GE universal remote control for Samsung Smart TV. Furthermore, I’ll demonstrate how to program a GE universal remote control to work with a Samsung television.

Three distinct version code lists are available for GE universal remote controls: CL3, CL4, and CL5. When paired with Samsung Television, your GE universal remote control will appear in one of these three code lists. As a result, the GE remote code for Samsung TV must be located inside the code list.

If your GE universal remote uses CL3 codes, you’ll need to locate the CL3 GE universal remote code for the Samsung TV brand.

GE Universal Remote Codes for Samsung TV

Fear not; I’ve included all of the codes for GE remotes below.

CL3 GE universal remote codes for Samsung TV 

27412071
27210781
01014941
02611311
02511221
29613471
07113321
00012141
03310571
03511501
05315521
54711911
49613301
35614011
1191

CL4 GE remote code for Samsung TV

33015791
5801

CL5 GE remote codes for Samsung TV

33015791
5801

Thus, how do you know which code list your GE universal remote control is using?

It makes no difference. The code list number will be presented on your remote. To ascertain which code list is being used by your GE remote, open the battery cover and look for CL3, CL4, or CL5.

Samsung Television GE Universal Remote Control Code:

The following is an entire list of Samsung television universal remote codes:

Codes for Samsung televisions using the CL3 GE universal remote control (4 digit codes) –

CL4 universal remote control code for GE Samsung televisions (4 Digits) –

Universal remote control code for GE Samsung TV CL5 (4 Digits) –

How to use codes to program the GE Universal to a Samsung television?

1. On your GE universal remote control, press and hold the “Setup” button until the red light on the remote control glows.

2. Then, using the GE remote, push and release the “TV” button several times, since we want to programme the Samsung TV using the GE remote.

3. Using your remote’s number keys, input any of the four digit remote codes. If your computer’s remote Code list is CL3, enter 3301. Input 5791.

4. if the list of GE remote codes is CL4 or CL5. Once the code is input, the red light that was previously activated will go off.

5. Following that, the testing phase began. Once the Samsung TV is turned on, press the keys on your GE remote control. Connect your GE remote control to the Samsung television and check that all of the remote’s buttons work properly.

6. If step 6 fails, repeat the procedure using a different code supplied.

Note:- If you’ve successfully connected your GE universal remote with your Samsung TV but not all of the buttons function properly, you can try a different code from the list.

The Step-by-Step Guide to Programming Your GE Universal Remote Without Using Codes

When using the auto-search approach, the universal remote itself is put through its own internal scanning procedure, which allows it to look up any code. It works by scanning one code at a time in order to identify the right remote code that is compatible with your remote in order to program the control. Please follow the directions that are listed below:

1. Activate, or “Switch On,” the intelligent device, such as a “TV,” that you want the universal remote to control.

2. After you have “turned on” the remote, press and hold the button for the appropriate device (TV, DVD, CBL, and OK/SEL) for three seconds. When the gadget is ready to be programmed, the LED light will light up.

3. Point the remote towards the device and press the “CH+” and “CH-” switches on the remote simultaneously. On/off signals are shown by the remote. Maintain sustained pressure on either the “up” or “down” key until the gadget powers down.

4. Make sure the code is correct by pressing the “power” key. The device ought to power up. If it does start, you can test to see if the remote is correctly programmed by switching the channel.

5. You can now save the code by pressing the “device” button. The code that has been stored will be validated by the LED of the Device flashing twice.

What Should You Do If the Code for the GE Universal Remote Doesn’t Work?

1. If the initial code you try does not work, you will need to try other codes from the table list before moving on.

2. However, if you are still having issues, you should switch out the batteries in your remote control.

3. There may be a physical barrier between the item you wish to operate and the remote. If there is, attempt to remove it and make sure it is not placed in that position.

4. At this point, you should experiment with using additional buttons and more functionalities. Since a GE Universal Remote is not compatible with all of the functions, you should look into purchasing one that has a greater number of options.

This whole thing was about how to configure a GE Universal Remote in order to get rid of the complication that comes with utilizing a multitude of different remotes. It is so straightforward that even a child might carry out these steps successfully. Now it is your chance to experiment with it, so go ahead and do so.

FAQ

1.Can I configure Samsung TVs of all kinds LCD, LED, Plasma Smart TVs with GE remote codes?

Samsung’s whole line of televisions utilises infrared remote controls (IR remotes). GE universal remotes operate by infrared, and they can be programmed to work with any model Samsung smart TV or Samsung non-smart TV, including LED, LCD, Plasma, HD, and Full HD televisions.

2.Can I configure Samsung TVs of all kinds LCD, LED, Plasma Smart TVs with GE remote codes?

Samsung’s whole line of televisions utilises infrared remote controls (IR remotes). GE universal remotes operate by infrared, and they can be programmed to work with any model Samsung smart TV or Samsung non-smart TV, including LED, LCD, Plasma, HD, and Full HD televisions.

You May Also Like

Emerson TV Codes for Comcast Remote & Program Guide

Trying to find Emerson Tv Codes for Comcast Remote? We compile information…

Step-by-Step Guide: Programming Philips Universal Remote Codes

Are you tired of juggling multiple remote controls for your TV, DVD…

Step-by-Step: Finding the Right 5-Digit Codes for RCA Remotes

Are you struggling to program your RCA Universal Remote? Look no further!…

Radio Shack 3 in 1 Remote Control code & Programming Guide

Do you know by the Radio Shack 3 in 1 remote control…