Universal Remote Codes for Sanyo TV & Programming Instructions
Among other things, a Sanyo TV can be set up with various remote controls that can be used to turn off the TV or adjust the volume. To successfully set up your Sanyo Remote Control with your TV, you just need to check which type of remote control you have and complete the setup process for each type. here we make a table in which you easily get the “Universal Remote Codes for Sanyo TV“.
Read More: Suddenlink TV Remote Codes With Program Suddenlink Remote
This blog post explains “how to program a universal remote to a sanyo tv”. Most of the time, however, the 049 sanyo code works on Sanyo TVs. If that doesn’t work, try the Generic remote codes for sanyo tvs.
Universal Remote Codes for Sanyo TV : 5 Digit
| Code | Code |
|---|---|
| 18924 | 16513 |
| 13419 | 11907 |
| 13183 | 17560 |
| 10088 | 10893 |
| 10232 | 11276 |
| 11780 | 14972 |
| 10146 | 15953 |
| 11142 | 10663 |
| 10154 | 11818 |
| 11362 | 10054 |
| 19655 | 11480 |
| 13488 | 10650 |
| 12653 | 12360 |
| 11362 | 10798 |
| 12878 | 10799 |
| 10735 | 14675 |
| 10232 | 10893 |
| 10107 | 10054 |
| 10815 | 11907 |
| 10250 | 13547 |
| 15545 | 10036 |
| 10484 | 10107 |
| 11756 | 10159 |
| 12264 | 14675 |
Sanyo Universal Remote Codes 3 Digits
If you are looking 3 digit code for sanyo tv, you are at the right place. In the below section, we have mentioned the complete list of sanyo tv remote codes 3 digits which you can use to program the Sanyo universal remote control.
| code |
|---|
| 013 |
| 069 |
| 110 |
| 108 |
| 054 |
| 180 |
| 209 |
| 049 |
| 004 |
| 023 |
| 025 |
What Is the 4 Digit Code for a Sanyo TV
You will find the complete list of 4 digit Sanyo universal remote codes in the list below. Before this, we have given the list of 3 digit Sanyo codes also. Please choose the Sanyo universal remote code as per your requirements.
| code |
|---|
| 0108 |
| 0049 |
| 0004 |
| 0268 |
| 0012 |
| 0180 |
| 0097 |
| 0110 |
| 0050 |
| 0049 |
| 0180 |
| 0012 |
| 0101 |
| 0065 |
Philips Universal Remote Codes For Sanyo
Do you have a Sanyo TV and want to connect it with Philips universal remote? If yes, you will need Philips universal remote codes for Sanyo TV. You can choose the desired sanyo remote control code from this list and program Philips universal remote with Sanyo TV very easily.
| code |
|---|
| 0612 |
| 0619 |
| 0311 |
| 0506 |
| 0802 |
| 0428 |
| 0002 |
| 0412 |
Sanyo Remote Code for Dish Remote
You can program your Dish remote with the Sanyo TV without any hassle. Just pick the required Sanyo TV universal remote code for Dish remote and follow the setup guide. Following is the detailed list of Sanyo TV codes for the Dish remote.
| Code | Code |
|---|---|
| 090 | 720 |
| 900 | 593 |
| 432 | 742 |
| 500 | 632 |
| 113 | 001 |
| 447 | 535 |
| 591 | 555 |
| 590 | 585 |
| 543 | 645 |
| 683 | 853 |
| 123 | 088 |
| 722 | 111 |
| 533 | 542 |
| 652 | 589 |
| 000 | 596 |
| 546 | 813 |
GE Universal Remote Codes for Sanyo TV
If you have a Sanyo TV at your home and your original device remote is not working, you can program the Sanyo TV with any other universal remote. One very famous universal remote is the GE universal remote control. To connect both the devices, you will need GE universal remote codes for Sanyo TV mentioned in the list given below.
| code |
|---|
| 0049 |
| 0268 |
| 0110 |
| 0108 |
| 0180 |
| 0004 |
| 0097 |
| 0012 |
Rca Universal Remote Codes for Sanyo TV
Check the following list of RCA universal remote codes for Sanyo TV. These are the four-digit remote codes for Sanyo. Be careful while choosing the codes and if one code does not work, pick another from the list of RCA universal remote codes for Sanyo TV.
| code |
|---|
| 1107 |
| 1004 |
| 1169 |
| 1196 |
| 1048 |
| 1180 |
| 1073 |
| 1080 |
| 1162 |
| 1049 |
How to Program a Sanyo Universal Remote with Auto Detection:
With the auto-detection method, all sanyo codes are scanned on your remote control. The sanyo remote codes are scanned one by one to find the correct sanyo tv remote codes that works with the remote to program the controller. Please follow the instructions below.
Step -1 .Turns your smart device into a “TV” that can be used as a universal remote control.
Step -2 .Turn on the remote control and touch the device buttons (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED display indicates that the device is ready for programming.
Step -3.Point the remote control towards the device and press “CH+/CH-“. Press on/off keys till the device turns off.
Step -4 .Press the on/off button to check the remote control codes for Sanyo TV. The device must be turned on. Make sure the remote is properly programmed by changing channels at startup.
Step -5 .Now click the “Device” button to save the code. The device LED will flash twice to check the stored remote control codes for Sanyo tv.
How to Program a Sanyo TV Remote Control Using the Manual Method:
You can easily program the Sanyo Universal Remote Control using the button code. The lock code identifies the make and model of the device.
Step– 1.First you need to “activate” the device.
Step 2.Click “TV” in “Sanyo universal remote control”.
Step 3.Now press and hold the “Setup” button on the universal remote until you see “Flash” (this means you are in “learning mode”).
Step 4. Finally, enter the “lock code” taken from the programming manual (operation manual).
Step 5.After completing this process, simply point the remote at your TV and press the power button. You can release the power button when the screen is off.
Your TV now works great as a universal remote control. If the device does not work, repeat the same process with different “remote control codes for Sanyo tv” in the same section of the reference table.
How to Set Up the Codes for a Sanyo Television and a Remote with search search:
If you cannot find the correct lock code for your current device, you can set the universal remote to the correct one in search mode. This is the manual mode code that puts the remote into search mode.
Step 1.First click on “Unlock device”, now “Settings” and keep clicking.
Step 2.Enter the code “9-9-1” (3 digits).
Step 3.Now hold down the “power” button on the remote control and press the channel up when turning off the device, in this case the TV will turn off.
The above method may take some time, but it is very important to generate the code to find the key. After completing the above process, the remote control will operate with all functions.
You can easily program the Sanyo TV Device universal remote control in the three ways above.
Setting up your Sanyo TV using the Dish Network remote
If you are using a Dish Network remote, set it up using one of the sanyo remote code listed below.
1: First press and hold the TV button on the remote until all 4 mode buttons are on.
Then enter the “590” and “#” key on your Dish Network Remote.2: Check it by turning it off, if the TV does not turn off then repeat the process with a different code.
Setting up your Sanyo TV with a DirectTV
Remote Setting up your Sanyo TV and DirecTV remotely is slightly different from other remote controls, but they usually use the same code. On the DirectTV remote, press and hold the mute and select buttons until the indicators on the remote flash twice. Enter “11142” on the DirecTV remote, then press the “Power” button on the remote. If your Sanyo TV is turned off, the remote has been successfully tuned to your TV.
If not, repeat the process and try other remote control codes for Sanyo tv until someone else works on it.
Setting up your Sanyo TV with Comcast / Xfinity Remote
Setting up your Sanyo TV and Comcast or Xfinity remotely is easy. Press and hold the “Settings” button on the remote until the LED color changes from red to green or flashes, then enter “10154” on the remote. Press the volume up button on the remote control. With the TV volume up, use the Comcast or Xfinity remote to successfully set up your Sanyo TV. If not, try again and try the next alternate remote control codes for Sanyo tv until someone works.
Setting up your Sanyo TV using the universal remote control
To set up your Sanyo TV using the universal remote control, press the Setup button on the remote control until the indicator comes on. Press the “TV” key on the universal remote control and enter “0049”. Press the TV button again, then press the volume up button on the remote control. If the volume has not changed, repeat the process with the replacement of sanyo tv program codes for sanyo tv remote programming.
