It has always been a challenging task to control all your entertainment devices with different remote controls. It is better to use a Dollar Tree universal remote which has the ability to operate many devices at your home with a single universal remote. You can control devices such as TV, Audio Receivers, DVDs, VCRs and many more pieces of equipment with the Dollar Tree universal remote control. But you have to add Dollar Tree universal remote codes to program it with the device. Universal remote controls are launched in the market with various advanced methods. Ten years ago, universal remote features increased to operate domestic entertainment gadgets. This blog will let you know about the complete procedure of programming a Dollar TV universal remote control.

Here, you will also learn about a series of Dollar Tree remote codes followed by step-by-step instructions to program the Dollar Tree universal remote with your favorite devices. You have to add one remote code for programming the Dollar Tree universal remote but that should match the brand of the programming device. Go through this section carefully and learn advanced methods of programming the Dollar Tree universal remote.

In the past ten years, universal remote features increased to manage domestic entertainment equipment. This guide walks you through the complete process of setting up a Dollar TV universal remote control. Also, it lists a series of Dollar Tree universal remote codes followed by stepwise instructions to program Dollar Tree universal remote control with your devices like TV, DVD, CD, Blu-ray, and more.

In the following section, you will get to know the Dollar Tree universal remote codes for your application. There can be a case that your chosen Dollar Tree universal remote codes don’t work. So, select another code from the given list.

Complete List of Dollar Tree Universal Remote Codes:

Here, you need to select the required code from list of Dollar Tree remote codes for your device. After the right code, follow the complete procedure to set up the Dollar tree remote control with your required device.

How to Setup Dollar Tree Universal Remote Control Manually?

The below instructions help you program Dollar Tree universal remote control with TV, VCR, DVD player, stereo, or other components in just a few minutes.

  1. Press the [SET] key on the remote control and then press the key to that component (such as “TV”) that is programming.
  2. Hold both keys in the LED light of the remote switch and then release the button.
  3. Enter the 3-digit code selected from the list of Dollar General Universal Remote Codes.
  4. Wait for 2 LED lights and press the remote control channel up button until the device function.

Read More: RCA Universal Remote Codes List & Program Instructions

How to Setup Dollar Tree Universal Remote Control with Auto-Search Method?

Step1- Firstly, switch on the device that you want to program. Make sure that the other programmable devices are not on.

Step2- Press the “Code Search” button on the GE remote control until the remote indicator blink, and then release the remote.

Step 3- Press the button for that device you want to program. For example, if you want to connect a DVD player, press the “DVD” button.

Step 4 – Press the [Power] button and release it unless the device is closed. Wait at least 2 seconds to press the power button.

Step-5 Lastly, tap on the [ENTER] button to save the device on the remote control.

How can you program a Dollar Tree Universal Remote Control?

Dollar Tree Universal Remotes can be programmed to operate various gadgets. One can program this remote control to operate the TV, DVD, VCR, Stereo and other components in a few minutes.

The programming steps are as follows:

  1. You need to hold down the ‘Set’ key of your Dollar Tree remote control and at the same time, click the component button for the device to be programmed.
  2. Next, hold down both the buttons till the LED light on the Dollar Tree remote lights up. Release the button.
  3. Now, put the three-digit code for your brand device using the keypad of your remote control. Check the remote manual to get the code.
  4. You have to wait for the LED flash two times and click the ‘Channel Up’ button on your remote control when the appliance starts to respond.

Does Dollar Tree Company sell Universal Remotes?

The Dollar Tree is a discount retail store that provides cheap universal remote controls to program different devices. You can use this remote control to program your TV, DVD player, VCR and many more devices with a few steps. Universal remotes can be programmed to operate your brand entertainment devices. Dollar Tree provides a great shopping experience to the customers.

How can I programme my television with a universal remote control?

Learn how to programme a GE remote control.

  • The GE universal remote’s battery cover and batteries must be removed before using the remote.
  • The Jasco website has a list of codes specific to your model, which you may download.
  • Turn on the gadget you’re working with to begin programming it (TV, DVD player, DVR, etc.).
  • Continue to hold down the SETUP button for four seconds, or until the indicator light turns red.

Do Universal Remotes are sold by Family Dollar?

Family Dollar sells Magnavox universal remote controls. Magnavox remotes have features that can control different types of devices with just a few simple steps. People can buy these remote controls from Family Dollar at a cheap cost.

What is the cost of a Universal Remote?

The cost of programming and consolidation services for universal remotes depends on your location, the number of devices you own and how long the work takes. To program a remote control, it takes about 3 hours and charges range as low as from 100 dollars to 800 dollars. It costs more for larger jobs.

The Conclusion

We have explained the Dollar Tree Universal remote codes list along with the setup procedure in the above guide. The process to operate Dollar Tree TV universal remote control with other devices is quick and straightforward.