How to Program Radio Shack 3 in 1 Remote Control

Do you know by the Radio Shack 3 in 1 remote control is made to handle all the devices? Radio Shack universal remote control allows you to handle many devices. Such as TV/DVD/VCR/ Cable Receivers by the universal remote control you don’t need to tangle between multiple remote control for multiple devices. If you are getting frustrated with too many remote or the original device remote control is misplaced. Then you can use the Radio Shack 3 in 1 remote control. You can be controlled all the devices with Radio Shack universal remote control.

But for this, you have to do the programming of the remote control and you’ll need Radio Shack 3 in 1 universal remote code. All the material is available here. For programming, you have to follow a few simple steps.

How to Program Radio Shack 3 in 1 Remote Control By “Code Search Method”:

Step1: I hope you can check your device is “ON”. If not then please “ON” it manually. As well as you can also fix a pair of batteries in the “Radio Shack 3 in one universal remote control”.

Step2: Look for the “SETUP” button on your remote control. And hold down the “SETUP” button until the keypad light illuminates.

Step3: Now, you can choose your favorite device which you wish to program it with universal remote control.

NOTE: For the selection of the device you have to tap on the “DEVICE” button. you have to press “SETUP” button and device button simultaneously.

Step4: You have to tap on the “CH+” button continuously. If you wish to program the remote control with your television and cable box.

Step5: If you wish to program your DVD player or VCRs. Then you have to tap on the “POWER” button continuously from your remote control.

Step6: If your television is able to change the channel. And if you are programming your DVD/VCRs then your device will have to be turned “OFF”.

Step7: If you complete all the following steps then you have to tap on the “ENTER” button from your remote control to exit the programming tab.

Now, Radio Shack 3 in one universal remote control is compatible with your device. Now you’ll be able to operate your device perfectly.

How to Program Radio Shack 3 in 1 Remote Control By “Code Entry Mode”:

Step1: Remove the battery cover from your back of the remote control. And Fix a new pair of batteries into your remote control. You’ll need to fix 2-AAA batteries.

Step2: “SETUP” button is located on your remote control. You have to press it till the indicating light illuminates.

Step3: Choose your device which you wish to operate with universal remote control. Like TV/DVD/VCRs/CBL and many more.

Step4: All the 3-digit code is listed above for your device. You have to pick any code or as according to your device. And enter it.

Read More : How to Get One for All Universal Remote Control Codes

Step5: If you entered the correct codes then the indicator light turned “OFF”. Or if you entered an incorrect code then the indicator light flashes.

After few minutes you’ll need to “ON” your device. “ON” your device manually. Try to change the channel by pressing the “CH” button from your remote control. Or you can also check it by pressing the “VOL+” button. If you able to feel the increase in the sound. Now, your remote control is compatible with your Radio Shack 3 in one universal remote control.

If your remote control is not compatible with your device. Try other codes from and repeat the programming procedure to program the universal remote control.    

Radio Shack 3 Digit Universal Remote Code List

code
011
020
062
013
141
014
006
151
010
077
030
133
143
032
155
309
052
317
183
035
275
184
041
190

Radio Shack 4 Digit Codes

code
1413
1412
1334
0227
1211
0342
1411

Radio Shack Universal Remote 5 Digit Codes

Code
10154
20037
20000
00797
00015
10409
10032
10047
20066
00153
31609
20240
30744
31263
31263
00775
00869
00052
00051
00869
11904
10047
20047
10178
10409
20046
20268
10039

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *