Find Universal Remote Codes for Tcl TV & Program Guide

If you want to know about the universal remote codes for TCL tv, this TCL Roku tv program remote guide is worth useful. In this post, we will provide a complete list of TCL remote control codes. In addition to the code list with the user guide, we will instruct you about setting up TCL Roku tv remote code for your Television or device.

You must have to choose the right code from the given list to set up the device with the Tcl tv code for a universal remote. Before we discuss to TCL tv remote with your audio or video device, let’s have a  look at the TCL television remote codes list. So, here we go.

Since we provide different codes in the list below, you can try it using the method below, the first method, or two other methods. Then why follow the list below and customize your remote using the methods below

GE Remote Code For TCL TV

Philips Remote program Code TCL TV

RCA Remote Code For TCL Television

Spectrum Remote Code TCL TV

Comcast Remote Code list TCL TV

Xfinity Remote Code list TCL TV

Vivitar Remote Codes For TCL TV

One for All Program Remote Code Tcl

Tcl Roku TV Remote Program Code

Programing TCL TV Universal Remote Control with auto search method:

With the automatic search method, all universal remote codes for Tcl TV is scanned on the remote control. The codes are scanned one by one to find the correct remote code which works by remote to program the controller. Follow the instructions below:

Step 1. Turn on the smart device as the “television” you want to use with the universal remote control.

Step 2. Turn on the remote control and touch the device button (TV, DVD, CBL, and OK / SEL) for 3 seconds.

Step 3. The LED indicator shows that the device is fully prepared for program

Step 4. Point the remote control at the device and click the “CH +” and “CH-” buttons. The remote control displays an on / off signal. Press the up or down button repeatedly until the device turns off.

Step 5. By clicking the On / Off button, you can verify the code. The device must be turned on. When starting up, try changing the channel to make sure the remote has been programmed correctly.

Step 6. Now tap on the “Device” button to save the code. The LED of the device flashes twice to confirm the stored universal remote codes for Tcl TV.

How to program TCL TV Universal Remote Control using the manual method:

With the help of the keycode, we can easily program a universal remote control and the keycode identifies your equipment make and model.

Step 1. You must first “turn on the device”

Step 2.Press “TV” on “TCL TV universal remote control”

Step 3. Now press and hold the “Settings” button on the universal remote control until “Flash” is displayed (ie in “Training mode”).

Step 4. Finally, enter the “lock code” that you have collected in the programming manual (operating instructions).

Step 5. After following the above step, “point the remote at the TV” then “Press and hold the Power button”.

You can release the power button once the screen is turned off

That’s all, your TV now works fine with a universal remote control. If your device doesn’t work, repeat the same process with other universal remote codes for Tcl TV from the same section of the reference table.

How to program the TCL TV Universal Remote Control with code search method:

If you cannot find a suitable lock code for your device at this time, you can set the universal remote control to the correct one in search mode.This is a manual mode code that causes the remote control to go into search mode.

Step 1. First “activate device”

Step 2. Now hold down the “Setup” button

Step 3. Enter the code “9-9-1” (three digits)

Step 4. Now, using the remote, hold down the power button and push the channel up until the device switches off your TV.

With the above three methods, we can easily program our TCL TV universal remote control.

Conclusion:

If you have additional remote control codes for this device please mention this code in the comments section below. We will update them in the list above.