Samsung TV Universal Remote Codes & Programming Methods

TVs such as Samsung, where customers can watch cable programs, as well as visual and audio signals from devices such as VCRs and DVD players. If you don’t have a Samsung TV remote, you can use a universal remote. You can remotely program your TV to work using a Samsung TV Universal Remote Codes. As far as you know the code for the Samsung Universal Remote Control, the procedure is clear.

How to Program Samsung TV Universal Remote Control without Codes?

In this section, you will find the method to program Samsung universal remote using an automated method. In this method, the remote will scan all the Samsung TV universal remote codes one by one to find the correct code. Follow the given steps and program the Samsung TV universal remote without using any codes.

1. Firstly, turn on the device you want to program with Samsung TV universal remote control.

2. Once you have switched on the device and remote, press the component button (TV, DVD, CBL, and OK/SEL) for almost three seconds. An LED flash will blink, showing that now the device is ready to be programmed with a Samsung remote.

3. Now, hold the Samsung universal remote in front of the device and repeatedly press the “Ch+” and “Ch-” buttons. The Samsung TV universal remote will give On/Off signals. Keep pressing the channel buttons unless the device you want to connect with the Samsung universal remote turns off.

4. Finally, you have to verify the Samsung TV universal remote code by clicking on the “Power” button. If the device responds, this means that Samsung TV universal remote setup is successful.

5. After completing all the above steps, press the “Setup” button on Samsung TV universal remote, and the code will be stored.

Samsung TV Universal Remote Control Codes

The following is a list of Samsung TV remote control codes that can be used with all Samsung TVs. This code can be used with any universal remote if you need a 3, 4, or 5 digit code on your remote, and it is very easy to use on your Samsung TV. You only need to try the universal code for your Samsung TV remote control once.

What Is the 4 Digit Code for a Samsung TV?

If you want to program Samsung TV universal remote with your device, here is the complete list of 4-digit codes for Samsung TV. You will need these codes to connect your devices with the Samsung universal remote. But, if one code does not work, you choose another code from the Samsung TV universal remote codes list and follow the programming steps again.

code
0226
2137
0618
0009
0037
0812
0093
1312
1249
0178
1235
0587
0556
1744
0644
2103
3131
0264
1584
2051
1458
1630
1619
1506
0370
0208

5 Digit Code-Samsung TV Universal Remote Codes

Are you looking for 5 digit codes for Samsung TV? If yes, we have got you all covered with the complete Samsung TV universal remote codes 5 digits. In this list, you will find multiple 5 digit codes that you will need to connect Samsung TV with a universal remote control. So, check the complete code list along with the different programming methods for Samsung TV universal remote.

code
10056
10812
10650
11632
10030
10060
11060
10766
10814
10482
10408
10427
10329
10178
10217
11959
13993
10702
12051
10032
11575
10587

GE Universal Remote Control Codes for Samsung TV

If you want to program your Samsung TV with GE universal remote, you will find the solution here. In this section, we have given the complete list of GE Universal remote codes for Samsung TVs. Check out the complete list here and find out the required Samsung remote codes.

code
70076
0942
0005
0009
0004
0358
0007
0172
0106
0104
0109
007
0105
0080
0085
0012
0015

Dish Remote Codes for Samsung TV

Do you want to program the Dish remote with Samsung TV? If yes, you will need the list of Dish remote codes for Samsung TV. We have mentioned the complete list of Dish universal remote codes for Samsung TV in the following section. Check the list to choose the appropriate Dish universal remote code.

code
1661
3811
3831
3711
4841
0261
0051
3881
4101
5201
5191
3921
2401
1561
3811
3741
0161
2141
2551
3861
4111
3601
3211
3771
3661
3911
1181
3821
0301
3921
3711
3211

Samsung DVD Remote Control Code

You can connect any device with Samsung universal remote control. If you wish to connect the DVD player with Samsung remote, we have a solution for you. To program the remote with a Samsung DVD player, a set of universal remote codes will be needed. In the list given below, find out the complete list of Samsung DVD remote control codes.

4 Digit Remote Codes5 Digit Remote Codes5 Digit Remote Codes5 Digit Remote Codes
1936102171006010587
0573101101158110329
0744108141163210032
0820107021195910482
0490100301081210178
1075104271106010032
1932102501076611060
1928100371001911632

RCA Codes for Samsung TV

If you want to program a Samsung TV with the RCA universal remote control, you might need the list of RCA codes for Samsung TV. This section gives the complete list of universal remote codes to connect RCA universal remote with the Samsung TV. So, choose the code needed and follow the programming instructions to set up RCA universal remote with Samsung TV.

4 digit code5 Digit Code
101210056
105610702
107811060
101510766
110210030
100410060
120710812
106910054
112310650
120510178
110410814
110310482
106510250
104611581
101310060
100910766
102510587
119410030
112410217
101410329
108311632

How To Program Samsung universal remote control?

You can set the remote control code for your Samsung TV using various remote controls that turn on the TV or adjust the volume. You can set the Samsung remote control code effectively with the remote control. Just decide which type of remote control you have and follow the setup procedure for each type. For more information on Samsung Universal Soundbar remote codes, see this article. To set up your remote, you need to follow these steps.

Read More: How to Program Cox Remote With Cox Remote Codes

Step 1. First, you need to click on the “Menu” button.

Step 2. Then you need to go to the menu.

Step 3. You must go through the system.

Step 4. Then go to Device Manager.

Step 5. You need to set the universal remote control in the settings.

Step 6. You need to follow the instructions on the screen.

Programming Method for Samsung Universal Remote Control with Auto Search Function:

When using the auto search method, all Samsung TV universal remote codes will be scanned by the remote control. Scan the code one by one to find the correct remote control code that works with remote control programming. Please follow the instructions below.

Step 1.Turns your smart device into a “TV” that can be used as a universal remote control.

Step 2.Turn on the remote control and touch the device buttons (TV, DVD, CBL, and OK / SEL) for 3 seconds.

Step 3. The LED display indicates that the device is ready for programming. Then point the remote towards the device and press “CH+”.

Step 4.Press the on/off button to check the Samsung TV universal remote codes.

Step 5. The device must be turned on. Make sure the remote is properly programmed by changing channels at startup.

Step 6. Now click the “Device” button to save the code. The device LED will flash twice to check the stored code.

How to Program the Samsung Universal Remote Control Manually?

 You can easily program the Samsung universal remote control with the button code. The lock code identifies the make and model of the device.

Step 1.First you need to “activate” the device.

Step 2. Click “TV” on “Samsung Universal Remote Control”.

Step 3. Now press and hold the “Settings” button on the universal remote until you see “Flash” (which means you are in “learning mode”).

Step 4.Finally, enter the “key code” (instruction booklet) from the programming manual, then simply point the TV at the remote control and press the on / off button.

Step 5 . You can release the power button when the screen is off.

That’s all. Your TV now works fine with the universal remote control. If the device does not work, repeat the same process with a different code in the same section of the reference table.

How To Program My Samsung Remote with Search Mode?

 If you cannot find the lock code for your current device, you can set the correct lock code on the universal remote control in search mode. This is the manual mode code that puts the remote into search mode.

Step 1. First tap “Unlock device”, now “Settings” and keep pressing Enter the code “9-9-1” (3 digits).

Step 2. Now hold down the “Power” button on the remote control and press the channel up when the device in this case turns off the TV.

The above method may take a while, but it is very important to find the lock code. The remote control works for all functions according to the above procedure. It’s a very simple process, so I hope you can learn more about how to set up a Samsung remote control code.

However, if you still have questions about the remote control code for your Samsung TV, if you need a different Samsung TV universal remote codes for your universal remote control, leave a comment in the comments section below.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *