Do you have a digital converter at your for a universal remote control for it? If yes, then you are at the right place where you will find details about DirecTv universal remote. This guide mentions the complete information about the DirecTv universal remote that you can use to quickly control the digital converter box. All you have to do is connect the DirecTv universal remote with your respective converter box. Keep reading to find the digital converter box remote codes for DirecTv.
Below you will find the procedure steps to program the Digital converter box with DirecTv Universal Remote Control and other information.
First, look at the Digital Converter Box Remote Codes for Directv list. You must select the correct code according to the digital converter box.
Below we have mentioned the complete Digital Converter Box Remote Codes for Directv. You have to choose the appropriate codes for the digital stream converter box as per the DirecTv remote you want to program and follow some instructions. After the list, we have given the complete detailed steps to program DirecTv universal remote with your converter box. So, firstly, have a look at the Digital Converter Box Remote Codes for Directv list given below.
Digital Converter Box Remote Code for Directv
In this section, we have given the complete list of Digital Converter Box Remote Codes for Directv required to connect the DirecTv universal remote with the digital stream converter box. Choose the required code as per your need and then follow the steps given in further sections.
DirecTV Remote to a Digital Stream Converter Box
5 Digits Digital Converter Box Remote Codes for Directv List
4 Digits Digital Converter Box Remote Codes for Directv
3 Digits Digital Converter Box Remote Codes for Directv
How to Program DirecTv Remote to a Digital Stream Converter Box Manually?
Step- 1. Firstly, Turn on the device to program with the DirecTv remote.
Step- 2. Press the component button on the DirecTv universal remote control(TV) for the device you need to program. For example, press the TV button to program the TV with the DirecTv universal remote.
Step- 3. Now, press and hold the Setup button on the DirecTv universal remote and keep holding until the button gets lit.
Step- 4. Once the LED turns on, enter the appropriate DirecTv code you chose from the DirecTv converter box TV codes list provided above.
Step- 5. Once you are done, point the remote towards the digital stream converter bx . Press and hold the power button while the DirecTv universal remote is facing the device.
Step- 6. When the converter box switches off, release the button from the DirecTv remote.
Step- 7. Now, your device will function properly with the DirecTv universal remote control. If it doesn’t, try to use some other code from the DirecTv converter box remote codes list.
Auto-Search Method to Program DirecTv Remote to a Digital Stream Converter Box
Step- 1. Switch on your digital stream converter box and press the OK/SEL buttons on the DirecTv universal remote for 3-4 seconds.
Step- 2. The LED light on your converter box device will blink, indicating that your DirecTv remote is ready to be programmed.
Step- 3. Now point and press the “CH+” and “CH-” buttons on the DirecTv universal remote. There will be a signal displayed on the DirecTv remote showing On/Off.
Step- 4. You must continuously press the “up” or “down” keys until the digital stream converter box turns off.
Step- 5. Once the converter box turns off, switch it on again to recheck the DirecTv universal remote codes. If it starts, then your DirecTv universal remote is correctly programmed.
Step- 6. You can even save the code by switching on the digital stream converter box and the LED light will blink twice. This will confirm that the DirecTv universal remote code has been stored.
What are the Steps to Reset DirecTv Remote?
If your DirecTv remote is not working due to any reason, you can easily reset the DirecTv universal remote and the receiver.
Step- 1. You will find a red reset button on the DirecTv universal remote. Press and hold it until it restarts.
Step- 2. In case there is no red button on the DirecTv remote, you can unplug the receiver from the main socket and replug it after 10-15 seconds.
Step- 3. Now, Press the “Menu” button on the DirecTv universal remote.
Step- 4. Go to the “Settings” option and then click the Remote Control option and then click on “Select”.
Step- 5. Now, you will see a “Reset Remote” option. Choose it and click on Select to reset the remote.
Step- 6. If you have a DirecTv Genie remote, you will get n option to choose the remote type.
Issues you Might Face Using DirecTv Remote
Other than those issues that require resetting the DirecTv remote, there might be some other issues also that do not need resetting the remote. So, it is worth checking them before you give up.
1. Always check the batteries in the DirecTv universal remote if they are working fine. You can do so by pressing any button on the remote. If the light on the remote lights up, batteries are fine otherwise you need to replace them.
2. Secondly, check that there are no obstacles between the digital stream converter box and the DirecTv remote signal. If there will be anything in between the signal and device, the DirecTv universal remote might not function properly.
1. How can I reconnect the DirecTv remote to my digital stream converter box?
Ans. To reconnect the remote with the converter box, press the “Menu” button on the DirecTv remote, go to “Settings” and choose “Remote Control”. Now in the remote control menu, you have to select IR/RF setup option. Finally, press the “Continue” button and then Exit.
2. What is the code to reset DirecTv universal remote?
Ans. The code to reset a DirecTv remote is 981.
3. Where can I find the Reset button on the DirecTv receiver?
Ans. On the side of the DirecTv receiver, there will be a RED button for reset.
In the above write-up, we have explained different methods to program the DirecTv remote to a digital stream converter box and Digital Converter Box Remote Codes for Directv. Also, we have given a complete list of DirecTv universal remote codes that can be used to connect the converter box to the remote.