Sansui TV Universal Remote Control Codes & Programming Instructions

Almost all Sansui TV users are interested in the use of universal remote control, and there are various remote control devices such as B. 3-digit Sansui code for remote control and 4-digit code for Sansui TV, etc. If you are also looking for universal remote control codes, this blog offers all kinds of Sansui TV universal remote control codes and with these codes everyone can use their Sansui TV remote control to program the universal remote control of their choice.

How to program the Sansui TV Universal Remote?

There are three commonly used methods for programming your TV with your favorite universal remote. We also offer official methods. So we first provide official methods and then move on to general methods like code, manual tuning, and programming. via remote Sansui code.

Use the dish remote control to use Sansui TV (official method).

Step 1. Just switch your dish to the TV remotely at the top there is a “TV button”.

Step 2. Hold it until all 4 indicators light up, from the top hit “Red Power Button”.

Step 3. Press and hold the “Ch +” button until the device turns off.

Step 4. Now click the “Pound Button” lastly press “Big Red Power Button” 3 to 5 times.

This is the official method for programming your TV remote control with a universal remote control. If you do not find that your remote control is not programmable, you can also use the following method.

How to program a Sansui universal TV remote control with auto search?

With the automatic search method, all universal remote control codes are scanned on the remote control. The codes are scanned one by one to find the correct remote code that works with the remote to program the controller. Follow the instructions below:

Step 1.” Turn on” the smart device as the “television” you want to use with the universal remote control.

Step 2.Turn on the remote control and touch the device button (TV, DVD, CBL, and OK / SEL) for 3 seconds. The LED display indicates that the device is ready for programming.

Step 3. Point the remote control at the device and click the “CH +” and “CH-” buttons. The remote control displays an on / off signal. Press the up or down button repeatedly until the device turns off.

Step 4. Check the code by clicking the On / Off button. The device must be turned on. When starting up, try changing the channel to make sure the remote has been programmed correctly.

Step 5. Now tap on the “Device” button to save the code. The device LED flashes twice to confirm the stored code.

How to manually program a Sansui TV universal remote control?

With the help of the keycode, we can easily program a universal remote control and the keycode identifies your equipment make and model.

Step 1.You must first “turn on the device”

Step 2. Press “TV” on “Sansui TV Universal Remote”.

Step 3. Now press and hold the “Settings” button on the universal remote control until “Flash” is displayed (ie in “Training mode”).

 Step 4. Finally, enter the “lock code” that you have collected in the programming manual (operating instructions).

Step 5. After doing this, “point the remote at the TV” then press the “Press and hold the Power button”.

Read More : How to Get Olevia TV Universal Remote Codes

Step 6. You can release the power button when the screen is off

That’s all, your TV now works fine with a universal remote control. If your device doesn’t work, repeat the same process with other codes from the same section of the reference table.

How to program the Sansui TV Universal Remote with code search?

If you cannot find a suitable lock code for your device at this time, you can set the universal remote control to the correct one in search mode. This is a manual mode code that forces the remote control to search mode

Step 1. First “activate device”

Step 2. Now hold down the “Setup” button

Step 3. Enter the code “9-9-1” (three digits)

Step 4. Now hold down the power button on the remote and press channel up until the device turns off your TV.

The method above may take some time, but it is very important to find your lock code. After the above process, your remote control will work for all functions.

Sansui TV Universal Remote Control Codes—Sansui 3 Digit Remote Codes

code
865
060
834
029
227
171
055
011
310
030
527
748
208
908
750
985
211

Sansui TV Universal Remote Control Codes – Sansui 4 Digit Universal Remote Codes

code
1052
0264
1208
2832
1267
6071
1230
0310
0171
0888
0806
5010
0394
5871
5441
0698
1337
1556
1107
6061
0135
5006

Sansui TV Universal Remote Control Codes – 5 Digit Code for Sansui TV

code
11670
11904
11938
13700
20695
11938
10173
11892
12258
13559
12282
10463
13520

Sansui Code for Rca Universal Remote

code
1208
1284
1247
1045
1191
1052
1290
1086
1090
1282
1284

Sansui TV Remote Codes Dish Network

CodeCode
6721670
500522
526509
694752
35640463
265865
841866
001533
899374
846721
089276
420985
7331463
621250
918123
730726
854622
8583377
171041
0171569
750720
748138
898227
1409527
1935834
908000

What are the Sansui tv codes for a Directv remote ?

1107

1382

1384

1383

1122

1023

1273

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *