Rca Universal Remote Codes for Sony Blu Ray Player & Guide

Do you want to connect your RCA universal remote for a Sony Blu-ray player? If so, then you have landed on the right page. To program a universal remote for the Blu-ray player you need RCA universal remote codes and instructions to program. In the following table, you can find remote codes and instructions. We have discussed various methods to program. RCA universal remote codes for Sony Blu-ray players are listed below. 

Listing of RCA Universal Remote Codes for Sony Blu Ray Player

The following table are the remote codes for RCA universal Blu Ray player. So, select your RCA remote codes from the following list and follow the below process to program your device with a universal remote. 

Blu-Ray BrandRCA code
Denon32258
Insignia30675 32428 32596
Integra31769 32147
JVC32365
LG30741
Magnavox30675
Marantz32414
Microsoft32083
Olevia32331
Onkyo31769 32147
Panasonic31641
Philips32084 32434
Pioneer30142 32442
RCA31769
Samsung30199
Sharp32250
Sony31516
Sylvania30675
Toshiba31769
Viore32553
Vizio32563
Xbox32083
Yamaha32298

How to Program RCA Universal Remote for Sony Blu-Ray Player

We have shared the two main methods to program RCA universal remote for Sony blu ray player and the methods are Manual and without code. So, you need to choose one method from these two and follow the instructions and if you find any difficulty then, try with another method again if you face any issue then, let us know

Programming RCA Universal Remote for Sony Blu-Ray Player Manually

Select a program code from the above RCA universal Blu ray code list and to program follow the below procedure

  1. Switch on the Blu-Ray device 
  2. Press the TV button on your RCA universal remote control.
  3. Press and hold down the SETUP button on the remote control and wait until the light turns on. 
  4. Enter the chosen RCA Blu ray codes 
  5. Tap on the power button and wait for the device to turn off.

If the device is not responding or the code is incorrect then, try another code from the listing and follow the same above process.

Programming RCA Universal Remote for Sony Blu-Ray Player Without Using Codes

This method helps you to find the correct remote codes. As the auto search method, scan all the universal remote codes to find the right one. Follow the below without finding code instructions. 

STEP:1 Switch on the Blu-ray device to connect it with the RCA universal remote.

STEP:2 With the help of the remote control tap on the (Tv, DVD, CBL, OK\SEL) device button for a few seconds. The light will indicate and your device is ready to program

STEP:3 Now, click on CH+\CH- button and on\off signals will be shown on the RCA universal remote. 

STEP:4 Turn off the blu ray device by repeatedly pressing the up or down key

STEP:5 Tap on the power key and your code will be verified. 

STEP:6 When the blu ray device turns on. Ensure you confirm that your RCA universal remote is working perfectly with the Blu-ray device. 

STEP:7 Now, you need to save your code on the device by clicking on the device button. When the device is stored, you will notice a light blinking two times.

What is the best way to determine which RCA television I own?

The model number of your RCA television may be found on the back of your television, in its manual, or in the TV’s menu/settings if you wish to start your search by RCA television model.

What year does my RCA television belong to?

The month and year of manufacture are programmed into the serial number of the appliance (not the model number) during the manufacturing process. Our serial numbers begin with two letters, which is standard practise. The month is represented by the first letter, and the year is represented by the second letter.

What is causing my RCA remote to be unable to change channels?

Set the remote control to its default settings. To reset the microprocessor in the remote, first remove the batteries and then press and hold the number 1 key on the remote for several seconds to restart the remote. In order to reinsert the batteries, release the number 1 key and hit the ON/OFF button. Try again if it does not light up. If it does light up, reprogramme the remote.

When I use the remote control, my television does not reply. Why is this?

Low batteries are frequently the cause of a remote control that will not react or operate your television. Make certain that the remote is pointed at the television. Aside from other gadgets, certain types of illumination, or something obscuring the TV remote sensor, there may be something interfering with or interfering with the signal.

How can I set my RCA remote-control code?

Manually switch on the component that you wish to operate using the IR remote.

Continue pressing and holding the CODE SEARCH button till it remote’s indicator light turns on.

To programme a component key, press the key that corresponds to it…

You should point your remote control at the front panel of the component that you’d want to control.

What is the way to program the universal remote with tv?

Start by turning on your television or any device that you desire to manage. To activate the device, press and hold the corresponding DEVICE and POWER keys on the remote control for a few seconds. Hold both buttons down until the power button flashes, and then release both buttons at the same time to complete the process. Using the remote control to point at the TV or another device, press and hold the Power button on the remote for 2 seconds.

What model of RCA television do I have?

Many RCA products have a model number that may be found on the packaging or labelling. If you have an RCA product that does not have a product label and you do not notice a model number printed immediately on the product, consult the user manual that came with your product.

What is the way to reset RCA remote?

Reset the remote control. To reset the microprocessor in the remote, first remove the batteries and then press and hold the number 1 key on the remote for several seconds to reset the microprocessor. Releasing the number 1 key will allow you to reinsert your batteries and hit the ON•OFF key again. If the light comes on, reprogram the remote and try again. If the light does not come on, try again.

What year does my RCA television belong to?

The month and year of manufacture are programmed into the serial number of the appliance (not the model number) during the manufacturing process. Our serial numbers begin with two letters, which is standard practise. The month is represented by the first letter, and the year is represented by the second letter.

The Final Words

In today’s article, we’ll walk you through the whole process of configuring your RCA remote control system. If you follow the procedures outlined above, you will be able to complete this activity in a short period of time. In addition, we have included answers to some of the most often asked questions by users. I really hope you enjoyed reading the post. Thanks.

Related Articles

Leave a Reply

Your email address will not be published.

Adblock Detected

Please consider supporting us by disabling your ad blocker

Slot Gacor

Slot Gacor

Slot Gacor

Slot Gacor

Slot Online

Slot Gacor

https://sandpointmedspa.com/wp-content/uploads/bocoran-situs-slot-gacor-gampang-menang/